Tectyl 802A Corrosion Preventive Lubricating Oil
Tectyl 802A is a lubricating oil and corrosion preventive compound. Tectyl 802A is approved under Military Specifications MIL-PRF-3150C, Amd. 2, (superceded by Mil-Pref-31500) QPL Reference Number L-6564, and IL-P-116J, Type P-7. It is used to protect transportation equipment assemblies.
|Tectyl 802A Laboratory Data||Tectyl 511M Typical Properties|
|Tectyl 802A Flash, PMCC*, Minimum||330°F|
|Tectyl 802A Density, Weight/Gallon @ 77°F (25°C)||7.64 lbs./gallon|
|Tectyl 802A API Gravity @ 60/60||22.5 ± 0.5|
|Tectyl 802A Specific Gravity @ 60°F (15.6°C)||0.93|
|Tectyl 802A Recommended Dry Film Thickness over Metal Profile||0.4 mils|
|Tectyl 802A Theoretical Coverage @ Recommended DFT||3,890 sq. ft./gallon|
|Tectyl 802A Viscosity @ 100°F (37.8°C), SUS||545|
|Tectyl 802A Pour Point||0°F|
|Tectyl 802A Non-Volatile % by Weight||97.5 ± 2|
|Tectyl 802A Non-Volatile % by Volume||97 ± 1|
|Volatile Organic Content (VOC), Typical CALCULATED||0.19 lbs./gallon|
|Volatile Organic Content (VOC), Actual EXEMPTED||<0.1 lbs./gallon|
Tectyl 802A Accelerated Corrosion Tests:
|5% Salt Spray (Hours) ASTM** B-117 @ Recommended DFT (2x4x1/8 in. Polished Steel Panels)||96|
|100% Relative Humidity (Hours) ASTM D-1748 @ Recommended DFT (2x4x1/8 in. Polished Steel Panels)||1300|
Tectyl 802A Surface Preparation
The maximum performance of Tectyl 802A can be achieved only when the metal surfaces to be protected are clean, dry, and free of rust, oil, and mill scale. Daubert Chemical Company recommends that the metal substrate temperature be 50 – 95°F (10 – 35°C) at the time of product application.
Tectyl 802A Storage
Store Tectyl 802A at temperatures between 50-95°F (10-35°C). Mild agitation is recommended prior to use.
Tectyl 802A Application
- Tectyl 802A is formulated to be used as supplied.
- Ensure uniform consistency prior to use.
- Continued stirring is generally not required.
- If the product thickens due to cold storage or loss of solvent during use, contact Daubert Chemical Company.
- DO NOT THIN TECTYL 802A. Incorrect thinning will affect film build, dry time and product performance.
- Daubert Chemical Company recommends that the ambient and product temperature be 50 – 95°F (10 – 35°C) at time of application.
- Tectyl 802A can be applied by spray, slush, or dip.
Product Cross References:
Tectyl 802A Caution
For additional handling and first aid information, and product data sheet refer to:
Tectyl 802A Removal
TECTYL 802A can be removed if necessary with TECTYL HPS solvent borne thinner, or lubricating oil. Avoid the use of highly aromatic solvents when removing from painted surfaces, as these solvents may adversely affect paint.