Read more about the article Krytox for Chemical Processing and Petrochemical Industry
Chemical processing specialty Lubricants-Grease

Krytox for Chemical Processing and Petrochemical Industry

Krytox Performance Lubricants Krytox Performance Lubricants for the Chemical Processing and Petrochemical Industry. Chlorine, Fluorine, Oxygen...Krytox Lubricants Are Safe for Use with Reactive Chemicals Start Shopping Now Get a FREE…

Continue ReadingKrytox for Chemical Processing and Petrochemical Industry
Read more about the article Krytox Lubricants for Electronics & Semi-Conductor Industry
Electronic & Semiconductor Industries Specialty Lubricants

Krytox Lubricants for Electronics & Semi-Conductor Industry

Krytox Performance Lubricants for the Electronics/Semi-Conductor Industry Krytox fluorinated, low-friction lubricants first earned their reputation for reliable performance in critical aerospace projects, such as the traction motors in NASA’s Lunar…

Continue ReadingKrytox Lubricants for Electronics & Semi-Conductor Industry

krytox Lubricants Properties Stability

Chemours Krytox Lubricants Properties Stability

One of the greatest advantages of using Chemours Krytox lubricants is stability in a wide variety of operating conditions and environments. This inert nature is what allows Krytox oils and greases to outlast and outperform competing hydrocarbon products.

(more…)

Continue Readingkrytox Lubricants Properties Stability
Read more about the article Krytox Properties Lubricants Consistency
Krytox Does Not Oxidize

Krytox Properties Lubricants Consistency

Dupont Krytox Properties Lubricants Consistency

Krytox Oil Viscosity

There are two measurements of viscosity: kinematic and dynamic, or absolute viscosity . The viscosity expressed here is kinematic viscosity, the ratio of dynamic or absolute viscosity to density . This is the value usually measured . It can be converted to dynamic viscosity using the following relation:

Kinematic viscosity x density = Dynamic viscosity (Centistokes, cSt x g/cc = Centipoise, cP)

Because of the high density of Chemours Krytox fluids, the dynamic is almost double the kinematic viscosity .

Choosing what viscosity of oil to use depends on the application . Generally, lower viscosity oils flow more readily and are used in operations where high speed is desired. High viscosity oils are preferred for low speeds or heavy loads . Since viscosity drops as temperature increases and rises as temperature decreases, the choice also depends on temperature . Thus, for the same reference temperature, a lower viscosity oil would be preferred for high speed operations and a higher viscosity oil would be preferred for low speeds . This typically applies to choosing a base oil for grease as well .

(more…)

Continue ReadingKrytox Properties Lubricants Consistency

Krytox Performance lubricants Characteristics

Chemours Krytox Performance Lubricants Characteristics – Part II

Extreme Temperature Performance

  • Krytox oils and greases are the product of choice in extreme temperature conditions. Most petroleum products begin to degrade above 99 °C (210 °F) and are too viscous at temperatures just below –18 °C (0 °F).
  • Krytox synthetic lubricants have extreme temperature stability, with operating ranges from below –75 °C up to 350 °C (–103 °F to 662 °F) and temperatures up to 400 °C (752 °F) with appropriate metallurgy. Under the D-3336 test conditions of 177 °C (350 °F) and 10,000 rpm, the majority of competing hydrocarbon lubricants fail in less than 1,000 hr.
  • But the general purpose line of Krytox lubricants has been shown to last over 5,000 hr without failure, even at an increased temperature of 200 °C (392 °F). This extreme condition performance is what distinguishes Krytox performance lubricants from other competing products.

Cost Effective of Krytox Performance lubricants 

  • Krytox lubricants are cost effective across a wide range of applications. Due to their inert nature, Krytox lubricants provide a much longer usable life as compared to typical hydrocarbon oils and greases, and the longer usable life allows them to remain for considerable periods of time before needing to be replaced, if they are replaced at all.
  • That translates to savings over time, both by lowering the amount of lubricant purchased and any downtime incurred during relubrication.

Performance Additives of Krytox Performance lubricants 

  • Anti-corrosion additives are combined with Krytox grease to enhance its ability to protect metallic surfaces from corrosion caused by moisture and oxygen.
  • Chemours also offers a patented oil-soluble additive to give the same corrosion protection to our oils.
  • Krytox greases containing anti-wear additives have properties that give high specific load-carrying capacity and the highest protection against wear.

(more…)

Continue ReadingKrytox Performance lubricants Characteristics
Read more about the article Chemours Krytox Lubricants Advantage
Chemours Krytox High Performance Lubricants!

Chemours Krytox Lubricants Advantage

Chemours Krytox Lubricants Advantage MIL-G-27617 – Part I

Discovered in 1959, the polymer that would become known worldwide as Krytox showed remarkable thermal and oxidative stability. Potential uses envisioned then included lubricant for the MACH 3+ turbine engine, hydraulic oil, rocket gear box lubricant, and even gyroscope oil.

In 1963, Krytox oil was used in a GE engine test for the supersonic transport aircraft. In 1964, new Krytox PFPE-based grease formulations were developed jointly with the US Navy and the Air Force, resulting in military specification MIL-G-27617, which was developed specifically to cover Krytox. The first commercial sales of Krytox were for non-flammable lubricants for the Apollo space program in 1965.

Prior to 1981, the only commercially available Krytox lubricants were aerospace oil and greases. Since then, PFPE-based oils and greases have been adopted across a very wide range of industries and applications. There are PFPE oils and greases for industrial operations, vacuum pump fluids, incidental food contact, automotive uses, reactive gas, and of course, military applications — to name just a few.

(more…)

Continue ReadingChemours Krytox Lubricants Advantage